Christie Mirage 304K, Installation And Setup Manual

Page: 24 / 68

LED State Description
Flashing Cool down Projector is moving to one of the two standby
states:
• Light source is off and video electronics are
booting up.
• Light source is off. Video electronics and light
source is cooling down.
Green Solid Light source on Light source is on. Projector status is OK.
Flashing Startup Projector is moving to light source on state. Light
source is warming up. Video electronics are
initializing.
Yellow Solid Warning in
standby Projector is in standby state. A problem exists with
the projector that does not prevent it from
operating.
Flashing yellow/green Warning during
startup Projector is in a startup state. A problem exists
with the projector that does not prevent it from
operating.
Flashing Warning with
light source on Light source is on. A problem exists with the
projector that will not cause it to shut down.
Flashing yellow/blue Warning during
cool down Projector is in a cool down state. Light source is off.
Video electronics and light source are cooling
down. A problem exists with the projector that
does not prevent it from operating.
Red Solid Error in
standby Projector is in standby. An error exists that
prevents the projector from starting up.
Flashing Error An error with the projector exists during startup,
cool down, or when the light source is off. Projector
will proceed to shut down.
Off AC off The AC power is off.
Projector LED shutter indicators
Identify the shutter LED state colors and meaning.
LED State Description
Solid magenta Shutter closed The shutter is closed.
In standby, the shutter is always automatically closed and
the magenta light is muted.
Off Shutter open The shutter is open.
Installation and setup
Mirage 304K (Bm.1) Installation and Setup Guide 24
020-102013-12 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.