3. Align the guides on the front cover and the lens marked by a red line.
4. Insert the lens into the projector and turn it clockwise until you hear two clicks.
The first click indicates the safety lock mechanism has been engaged.
5. Continue to turn the lens clockwise until you hear a second click.
The second click indicates the lens is fully locked in position. The top center label should face
up and be aligned to the lens guide on the front cover.
Connecting to AC power
The Mirage 304K projectors can operate in full or limited power modes, depending on the available or
required AC power source.
Power mode
Functionality
Input 1: Full power
• Six lamp mode
• 30 amp rated connector
• 200 - 240 VAC
• Full brightness
Input 2: Limited power
• Single lamp mode
• 15 amp rated connector
Installation and setup
Mirage 304K (Bm.1) Installation and Setup Guide
22
020-102013-12 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Summary of Contents for Mirage 304K
Page 1: ...Installation and Setup Guide 020 102013 12 Mirage 304K Bm 1...
Page 68: ......
