•
A—Hazard zone. The region of space where the projection light from the projector is above
emission limits for Risk Group 2. The light intensity may cause eye damage after a momentary
or brief exposure (before a person can avert his or her eyes away from the light source). The
light may cause skin burns to occur.
•
B—Hazard distance. Operators must control access to the beam within the hazard distance or
install the product preventing potential exposure of the spectators' eyes from being in the
hazard distance.
•
C—No access zone. Horizontal clearance of the no access zone must be a minimum of 2.5
meters.
•
D—Vertical distance to hazard zone. The hazard zone must be no lower than 3.0 meters above
the floor.
If the vertical distance to hazard zone requirement (Zone D) is satisfied, the horizontal
clearance distance (Zone C) is not needed.
•
E—Represents the top view of the projector.
•
F—Represents the side view of the projector.
The following table lists the hazard distance for the Christie projector lens with the zoom adjusted to
its most hazardous position.
Projection lens
Part number
Hazard distance
(m)
0.38:1
144-136101-XX
0.6
0.72:1 HB fixed lens
144-110103-XX
0.6
0.9:1 fixed lens
144-111014-XX
0.7
1.13-1.31:1 HB zoom lens
(Discontinued)
144-103105-XX
1.1
1.31-1.63:1 HB zoom lens
144-104106-XX
1.3
1.63-2.17:1 HB zoom lens
(Discontinued)
144-105107-XX
1.7
Introduction
Mirage 304K (Bm.1) Installation and Setup Guide
9
020-102013-12 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Summary of Contents for Mirage 304K
Page 1: ...Installation and Setup Guide 020 102013 12 Mirage 304K Bm 1...
Page 68: ......
