•
A—Hazard zone. The region of space where the projection light from the projector is above
emission limits for Risk Group 2. The light intensity may cause eye damage after a momentary
or brief exposure (before a person can avert his or her eyes away from the light source). The
light may cause skin burns to occur.
•
B—Hazard distance. Operators must control access to the beam within the hazard distance or
install the product preventing potential exposure of the spectators' eyes from being in the
hazard distance.
•
C—No access zone. Horizontal clearance of the no access zone must be a minimum of 2.5
meters.
•
D—Vertical distance to hazard zone. The hazard zone must be no lower than 3.0 meters above
the floor.
•
E—Represents the top view of the projector.
•
F—Represents the side view of the projector.
The following table lists the hazard distance for the Christie projector lens with the zoom adjusted to
its most hazardous position.
Griffyn 4K32-RGB
Projection Lens
Part Number
Hazard Distance (m)
High brightness
0.3
8
:1 enhanced
144-136101-XX
1.0
0.72:1fixed
144-110103-XX
1.0
0.9:1 fixed
144-111014-XX
1.2
1.13-1.31:1 zoom
144-103105-XX
1.7
1.13-1.66:1 zoom
144-129103-XX
2.2
1.31-1.63:1 zoom
144-104106-XX
2.1
1.45-2.17:1 zoom
144-130105-XX
2.8
Introduction
Christie Griffyn Series Installation and Setup Guide
10
020-103314-08 Rev. 1 (06-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
