ID
Port
Description
Default
enabled
SDVoE
enabled
A
HDMI
Accept digital video data from HDMI 2.0 input
with HDCP 2.2 and 1.4 support.
X
X
B
SDI
Accepts digital video data from 12G, 6G, 3G, and
HD SDI sources.
X
C
DisplayPort
Accepts digital video data from DisplayPort 1.2
input with HDCP 1.3 support.
X
D
Christie Link
Accept digital video data from QSFP+ 40 GB
optical Christie Link input.
X
X
E
SDVoE
Accept digital video data from SDVoE input.
X
F
USB -C
Connects a USB-C flash drive that has been
formatted with a FAT32 file system. Can be used
for upgrades, backups, restores, and
interrogators.
G
USB 3.0-A
Connects a USB flash drive that has been
formatted with a FAT32 file system. Can be used
for upgrades, backups, restores, and
interrogators.
H
Ethernet
Ethernet, and network connection for remote
control. 10/100/1000 Base-T Ethernet x 1
ruggedized connector.
I
3D Sync In/3D Sync Out
Supported for 3D-enabled projectors.
J
Christie Link
Reserved for future use.
K
RS232
Sends/receives Christie serial commands using a
standard RS232 serial cable.
L
GPIO
Provides a method for controlling the projector
using electrical signals.
M
Audio Out
Reserved for future use.
N
HDBaseT
Accepts HDBaseT V2.0 signals. HDBaseT x 1
ruggedized connector.
X
X
O
Wired keypad
Physically connects a remote control to the
projector.
Connecting an HDMI video source
For the projector to accept digital video data from HDMI sources, plug the HDMI source directly into
the Video Input panel.
The input configurations listed below are supported.
Input configuration
Description
One-Port
Enables connection of one HDMI cable. Supports both 2D and 3D frame-packed, top
and bottom. In this configuration, the HDMI input supplies the entire video raster.
Connecting devices and establishing communication
Christie Griffyn Series Installation and Setup Guide
51
020-103314-08 Rev. 1 (06-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
