Christie Griffyn 4K50-RGB Installation And Setup Manual Download Page 4

Page: 4 / 86

Projector LED status indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Projector LED shutter indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Turning off the projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Installing the projector lens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Calibrating the lens motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Removing the projection lens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Installing the ultra short throw projector lens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Aligning the image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Disposing of the product packaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Completing the installation checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Connecting devices and establishing communication. . . . . . . . . . . . . . . . . . . . . 50

Video Input panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Connecting an HDMI video source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

HDMI video formats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Connecting 12G, 6G, 3G, or HD SDI video source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

SDI video formats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Connecting a DisplayPort video source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

DisplayPort video formats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Connecting Christie Link video source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Christie Link video formats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Connecting an SDVoE video source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

SDVoE video formats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Connecting an HDBaseT video source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

HDBaseT video formats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Connecting to a computer with USB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Connecting to a computer or server with 10/100/1000 base-T Ethernet. . . . . . . . . . . . . . . . . 72

Setting up the Ethernet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Communicating with Christie Griffyn Series through Art-Net. . . . . . . . . . . . . . . . . . . . . . 72

Configuring the 3D Sync in/3D Sync out interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Content

Christie Griffyn Series Installation and Setup Guide

020-103314-08 Rev. 1 (06-2022)

If printed, please recycle this document after use.

Summary of Contents for Griffyn 4K50-RGB























































































Search results

Summary of Contents for Griffyn 4K50-RGB

Reviews:

Related manuals for Griffyn 4K50-RGB

Brands by name

Popular brands

Christie Griffyn 4K50-RGB, Installation And Setup Manual

Search results

Summary of Contents for Griffyn 4K50-RGB

Reviews:

Related manuals for Griffyn 4K50-RGB

Brands by name

Popular brands