ID
Component
Description
A
Projection lens
A variety of lenses can be used with the projector. Available lenses are listed in the
Christie Griffyn Series Service Guide (P/N: 020-103329-XX).
B
Front IR
Receives transmissions from the IR remote.
C
Service door
Provides access to the fold mirror, optical zoom/focus, and DMD convergence
adjustments as well as the tools for Christie qualified technicians.
D
Display panel
Displays the projector menus and status.
E
Keypad interface
Controls the projector.
F
Communication and
input panel
Connects media sources to the Video Input panel.
G
AC input
For use with projector power cord.
H
Power on/off switch
Switch to power the projector on or off.
I
Rear IR
Receives transmissions from the IR remote.
J
LED and shutter LED
status indicator
Indicates power status and shutter status.
K
Mounting and rigging
holes
M12 x 1.75 holes for projector feet installation and for mounting and rigging points.
Four holes located on the top, and four located on the bottom.
L
Adjustable feet
Raise or lower these feet when positioning the projector. Make sure the projector is
level on all sides and the displayed image appears rectangular without any keystone.
M
Bottom intake plates
Allows full airflow to the projector.
Installation and setup
Christie Griffyn Series Installation and Setup Guide
25
020-103314-08 Rev. 1 (06-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.