Christie DS+5K, User Manual

Page: 50 / 152

Section 3: Operation
3-24 User’s Manual
BLANKING (TOP, BOTTOM, LEFT, and
RIGHT):
Crop the image as desired so
that unwanted edges are removed from
the display (changed to black—see
right). Blanking defines the size of the
Active Input Window , or area of
interest. Range of adjustment depends
on the source resolution and other
factors. After adjustment of blanking it
may be necessary to perform a source
switch.
NOTE: Blanking a PIP image
resembles zoom (see Figure 3.6). For
example, left Blanking zooms the right
side of the PIP image; Right Blanking
zooms the left side. There are no black
bars.
Figure 3.6. Blanking of a PIP Image
PLUG & DISPLAY (EDID):
By default, a Plug & Play
(EDID) source outputs a signal according to the EDID
information provided by the projector. To override this
information and display in a different format (for example,
if your
Plug & Play [EDID] device does not support the
projector’s resolution and/or frequency), select the desired
Plug & Play (EDID) resolution from the list.
Any daisy-chained projectors will also display according
to the chosen
Plug & Play (EDID) format.
EDID = Extended Display Identification Data standard.
Blanking of a Primary Image
Downloaded From projector-manual.com Christie Manuals