Christie DS+5K, User Manual

Page: 147 / 152

Appendix F: Optional Input Modules
User’s Manual F-3
This module can display digital video input signals conforming to the DVI (Digital
Visual Interface) single-channel standard.
Features
◊
Supports Digital Visual Interface (DVI) single-channel
◊
Supports VESA

Extended Display Identification Data (EDID

)
◊
Provides an active-loop-through using a DVI connector (conforming to
the DVI Specification)
The module accepts a serial digital 4:2:2 component video signal (YCbCr) via a single
SERIAL IN
BNC connector. The signal can loop through the
SERIAL OUT
BNC out to
another device (such as another projector). Inputs are 75
Ω
terminated.
SDI Features
◊
Accepts serial digital 4:2:2 component video (YCbCr)
◊
Provides both a
SERIAL IN
and a
SERIAL OUT
BNC connector;
includes status LEDs for signal and error
◊
SMPTE 259M compatible
The Dual SD/HD-SDI Module enables incoming serial digital (SD or HD) data to be
tiled across multiple screen displays, overlapped for extra-bright displays, or
distributed to additional projectors for multiple, same-image screens.
Dual SD/HD-SDI Features
◊
Accepts and decodes up to two serial digital inputs
◊
Outputs up to two 10-bit YCbCr 4:2:2 video signals
◊
Provides input(s) to output(s) loop-through capability
◊
Supplies interchangeable inputs as part of the Picture-in Picture display
◊
SMPTE 259M and 372 compatible
DVI Input Module
'
38-804635-xx
Serial Digital Input Module
'
38-804602-xx
Dual SD/HD-SDI Module
'
38-804656-xx
Downloaded From projector-manual.com Christie Manuals