Christie DS+5K, User Manual

Page: 38 / 152

Section 3: Operation
3-12 User’s Manual
•
Or bypass the menus entirely and use a single key to immediately access an
adjustment during your presentation (applies only to options having their own
key, such as Contrast, Brightness, Gamma, etc.).
•
For “blind” access, hide the entire menu system (see OSD key, above) and/or
direct slide bars activated by their own key (such as Contrast, Brightness, etc.).
Control by using the proper keypress or numerical sequence of key presses.
Once selected, change the setting as desired (see below) and press to save and
return to the current function menu.
Slide bars in menus – The current value for a given parameter,
such as size or vertical stretch, appears to the left of its slide bar
icon (adjustment window). This number often expresses a percentage, or it may have
units associated with it (such as pixels, degrees Kelvin, etc.), depending on the
specific option. Press
to gradually adjust the setting up or down—both the
number and the length of the bar change accordingly. Hold for continuous adjustment.
Or press
to activate a slide bar text box for specific number entry via the keypad,
then press to save (or press
Exit
to cancel).
“Direct” slide bars - For quick access, you can access Gamma, Brightness, and
Contrast slide bars without traveling the menu system. For example, simply press
Cont
to immediately display the same contrast slide bar accessed with the Contrast option
in the
Image Settings menu.
Use the arrow keys to adjust a direct slide bar, or press and enter a specific
number from the keypad , then or or to save (or
Exit
to cancel). When
you are done, press
Exit
to save and return to your presentation.
NOTES: 1) You can still adjust a direct slide bar as usual if the display is turned off
(see
OSD
or Menu Preferences menu) — the slide bar just won’t be visible. 2) A
direct slide bar disappears if it is not used within 5 seconds.
Checkboxes -
Conditions are present if its adjacent
checkbox contains a checkmark. To toggle the checkbox,
simply highlight and press
, or highlight and use to check and
to
uncheck. If a checkbox is numbered, simply enter its number to immediately toggle
the checkbox.
Pull-down lists –
To see a pull-down list of options available for a given parameter
labeled with a
W
, you can:
•
Highlight it and press (Enter)
•
Or enter the menu option number.
Use the
or
keys to navigate up and down within the list (the current choice
is noted with a small
'
). Press to choose an option from the list, if desired (see
Figure 3.3).
Downloaded From projector-manual.com Christie Manuals