Christie DS+5K, User Manual

Page: 4 / 152

Section 1: Introduction
1-2 User’s Manual
Refer to Section 6 for a complete list of Specifications including Brightness and
Contrast and Optional Input Modules
The projector accepts data/graphics and video input signals for projection onto front
or rear flat screens. High brightness light is generated by an internal Xenon lamp then
modulated by three DMD (Digital Micromirror Device) panels that provide digitized
red, green or blue color information. Light from the “on” pixels of each panel is
reflected, converged and then projected to the screen through a single front lens,
where all pixels are perfectly superimposed as a sharp full-color image (
2D or 3D for
Mirage models only ).
The following listed items are shipped with your projector. Ensure you have received
all these items before using your projector.
‘
User’s Manual
‘
IR remote keypad (includes two, 1.5V AA batteries and a mini-stereo cable for
conversion to wired)
‘
Line cord
‘
Stereo 3D Cable (Mirage only)
‘
Warranty Card
Lamp Type Model Name Resolution ChristieTWIST 3D Motorized Lens
Mount
DLV1400-DX SXGA+ Optional y 500W Models
Mirage S+2K SXGA+ Optional
DW3K, DW3Kc HD2 Optional y
Christie DS+5K/Kc SXGA+ Optional
y
Mirage S+4K SXGA+ Optional
1000W Models
Matrix 4000 SXGA+ y
DW6K, DW6Kc HD2 Optional y
Christie DS+8K SXGA+ Optional y
1200W Models
Mirage S+8K SXGA+ Optional
NOTE: Kc models include the same features, but are color corrected to film color standards.
How the projector works
'
1.2 Components
Downloaded From projector-manual.com Christie Manuals