Section 7: Serial API
D4K25 Service Manual
7-23
020-100880-01 Rev. 1 (06-2012)
STOP DLP COMMUNICATION (STP)
Stop communications to DLP® Electronics temporarily, i.e. for DLP software upgrading.
SUBCODE
DESCRIPTION OF USE
NONE
0 - restart DLP communications;
1 - stop DLP communications.
EXAMPLES:
(STP 0) Restart DLP communication
(STP 1) Stop DLP communication
(STP?) Request current state. Example response is (STP!000)
PROJECTOR PLATFORM AND MOTHERBOARD RELATED INFORMATION (SYS)
Query only command that returns version information.
SUBCODE
DESCRIPTION OF USE
BACB
Return backplane version information.
FACB
Return faceplate version information.
PIBB
Return PIB3G version information.
EXAMPLES:
(SYS+BACB?) Returns backplane version information.
TARGET COLOR GAMUT (TCG)
Set the Target Color Gamut file. This file describes desired output colorimetry from the projector. For this control
to function the Measured Color Gamut Data must be accurate.
SUBCODE
DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select target color gamut for the current channel.
EXAMPLES:
(TCG+C108 “Atlantis”) Use file “Atlantis” on channel 108
(TCG+C108 ?) Get target color file name on channel 108
(TCG?L) List all available entries of target color control
ENABLE 3D (TDC)
Enable/disable 3D on the specified channel or the current channel. This controls the frame rate multiplication fea-
tures that allow for simulated three dimensional image projection.
SUBCODE
DESCRIPTION OF USE