Section 7: Serial API
D4K25 Service Manual
7-21
020-100880-01 Rev. 1 (06-2012)
SNMP AGENT CONFIGURATION (SNM)
This control will set the various configuration options for SNMP Agent
SUBCODE
DESCRIPTION OF USE
ENVT
Enables/Disables SNMP version 2 and enables version 3
LEXT
Gets/sets the Lamp Expire Trap Flag for the SNMP Agent
LHLT
Gets/sets the Lamp Half Life Trap Flag for the SNMP Agent
TSIP
Sets the Trap IP address for the SNMP agent
EXAMPLES:
(SNM+TSIP “xxx.xxx.xxx.xxx”) Sets the Trap IP address to xxx.xxx.xxx.xxx
(SNM+TSIP “0.0.0.0”) Setting the IP address to 0.0.0.0 will stop SNMP Agent from sending the traps.
(SNM+LHLT 1) Setting this flag to 1 will disable any future lamp half life traps
(SNM+LEXT 1) Setting this flag to 1 will disable any future lamp expire traps
(SNM+ENVT ?) Get the flag to see if V2 is enabled (1) or disabled (0)
(SNM+ENVT 1) Enable SNMP V2
(SNM+ENVT 0) Disable SNMP V2
SCREEN ORIENTATION (SOR)
Set screen orientation. This allows for flipping the screen orientation to allow for various mounting options of the
projector including the use of mirrors and front or rear screen projection.
SUBCODE
DESCRIPTION OF USE
NONE
Select Orientation:
0 - Normal Front,
1 - Inverted Rear,
2 - Normal Rear,
3- Inverted Front
EXAMPLES:
(SOR?L) List orientation options
(SOR?) Get the orientation status
(SOR0) Set orientation to front
SELECT SOURCE FORMAT (SRF)
S
elect the Source format file.
SUBCODE
DESCRIPTION OF USE