Setting up an integrated
media block
Configure the C projector to work with a third-party integrated media block (IMB).
Selecting IMB preferences
Choose from the available options to set the type of integrated media block (IMB).
1. To set the type of IMB, select Service Setup > Preferences.
2. Select IMB.
3. In the Type list, select from the available IMB models.
4. When the system prompts you to reboot the projector, select Reboot.
5. After the projector has restarted, log in with your user account.
Activating IMB marriage
After selecting the IMB type, you must install the IMB and complete marriage to display secure
content. You cannot complete marriage remotely.
The Marriage wizard requires you to confirm the IMB has not been tampered with.
1. Install the IMB in the available slot on the projector.
For more information, see the documentation provided by the IMB manufacturer.
2. In the left navigation menu, select Service Setup > Marriage Setup.
3. Select Start and confirm the security manager (SM), service door, and marriage ring are
secure.
4. Select Next and complete the marriage checklist.
5. Select Next and enter the marriage user and password credentials.
6. Select Login.
7. To start the marriage process, press the Marriage button on the projector within 30 seconds.
The system starts the marriage process and indicates when the process is completed
successfully.
8. Select Finish.
C User Guide–CP4415-RGB, CP4420-RGB, CP4435-RGB, CP4440-RGB, CP4450-RGB, CP2420-Xe, CP4420-Xe
62
020-103073-06 Rev. 1 (03-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for CineLife+
Page 112: ......
