Christie CineLife+ User Manual Download

Page: 107 / 112

2. Upload the required upgrade package to a USB key or to the

home/ftpuser

directory on the

projector.

NTFS-formatted USB drives are not supported for this release.

3. If using the USB method, insert the USB key into the projector.
4. In the left navigation menu, select Service Setup > System Upgrade.

The available upgrade packages are displayed on screen.

5. Select to select the upgrade package from the list.
6. Select Upgrade.
7. To begin the upgrade, select Upgrade in the confirmation dialog.

The projector restarts automatically when the upgrade is complete.

Backing up, restoring, and upgrading files

C User Guide–CP4415-RGB, CP4420-RGB, CP4435-RGB, CP4440-RGB, CP4450-RGB, CP2420-Xe, CP4420-Xe

107

020-103073-06 Rev. 1 (03-2022)

Summary of Contents for CineLife+

















































































































Search results

Summary of Contents for CineLife+

Reviews:

Related manuals for CineLife+

Brands by name

Popular brands

Christie CineLife+, User Manual

Search results

Summary of Contents for CineLife+

Reviews:

Related manuals for CineLife+

Brands by name

Popular brands