Network settings
Learn how to connect the projector to media devices and wired networks.
The system provides the MAC address of the projector automatically.
Connecting the projector to the theater network
Connect the projector to the theater network to control it remotely and allow it to communicate with
other network devices.
1. Connect the Ethernet cable from the theater network to the Management port on the input
panel.
2. In the left navigation menu, select Service Setup > Network Settings.
3. In the Port list, select Management.
4. Enter the network settings:
•
To obtain the network settings automatically, select Automatic.
•
To enter the settings manually, select Manual and complete these fields:
Field
Description
IP Address
IP address of the projector
Subnet Mask
Subnet mask to which the IP address belongs
Gateway
IP address for the network gateway
Primary DNS
IP address of the primary DNS server
Secondary DNS
IP address of the secondary DNS server
5. Select Save.
Activating SNMP
Activate the Simple Network Management Protocol (SNMP) to monitor the theater network for
conditions that indicate communication or hardware failures.
On C projectors, SNMP is enabled by default.
1. In the left navigation menu, select Service Setup > Network Settings.
2. Select the SNMP tab.
3. Select the SNMP slider.
The color of the slider changes to green to indicate it is active.
4. In the SNMP Settings area, select the SNMP version.
C User Guide–CP4415-RGB, CP4420-RGB, CP4435-RGB, CP4440-RGB, CP4450-RGB, CP2420-Xe, CP4420-Xe
59
020-103073-06 Rev. 1 (03-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for CineLife+
Page 112: ......
