Managing the lamp
Optimizing lamp performance can ensure you receive the brightest, most uniform image possible for
the life of the lamp.
Turning the lamp on
Learn how to turn the lamp on.
Do not attempt operation if the AC supply is outside the specified voltage range.
1. Turn on the circuit breaker for the projector.
2. Press and hold Power for two seconds.
3. Press and hold Lamp On for two seconds.
Turning the lamp off
Learn how to turn the lamp and projector off.
1. Press and hold Lamp Off for two seconds.
2. Press and hold Power Off for two seconds.
3. Disconnect the projector from AC power and turn off the circuit breaker for the projector.
Adjusting the lamp power
Learn how to adjust the lamp power.
1. In the left navigation menu, select Lamp Settings > Lamp Power/LiteLOC Setup.
2. Increase or decrease the Power % value.
3. Select Set Target.
4. Select Enable LiteLOC.
Changing the lamp power percentage
Learn how to change the lamp power percentage.
Entering a new Lamp Power percentage temporarily disables LiteLOC
™
settings.
1. In the left navigation menu, select Lamp Settings > Lamp Power/LiteLOC Setup.
2. Increase or decrease the Power % value.
C User Guide–CP4415-RGB, CP4420-RGB, CP4435-RGB, CP4440-RGB, CP4450-RGB, CP2420-Xe, CP4420-Xe
54
020-103073-06 Rev. 1 (03-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for CineLife+
Page 112: ......
