manualshive.com logo in svg

Christie CC50-2301, Installation Manual

Share
Download
Christie CC50-2301 Installation Manual Download Page 5

       

Table of Contents

CC50-2301/CC67-3001/CC72-3301 Installation ManualCC50-2301/CC67-3001/CC72-3301 Installation Manual

i

020-100248-03 Rev. 1 

1: Introduction

1.1 How to Use This Manual.............................................................................................................1-1

1.1.1 Typographical Conventions.................................................................................................1-2
1.1.2 Labels and Marking .............................................................................................................1-2
1.1.3 Illustrations ..........................................................................................................................1-2

1.2 Safety Warnings and Guidelines .................................................................................................1-2

1.2.1 Stacking Limitations ............................................................................................................1-2
1.2.2 Using Christie PE50/PE67/PE72 Pedestals .........................................................................1-3
1.2.3 External Support ..................................................................................................................1-3
1.2.4 Hardware..............................................................................................................................1-3
1.2.5 Lifting Display Cubes..........................................................................................................1-3
1.2.6 Airflow Considerations........................................................................................................1-3

1.3 Contact Information.....................................................................................................................1-3

2: Installation & Setup

2.1 Components .................................................................................................................................2-1

2.1.1 For CC50-2301 Cube Enclosures ........................................................................................2-1
2.1.2 For CC67-3001 Cube Enclosures ........................................................................................2-1
2.1.3 For CC72-3301 Cube Enclosures ........................................................................................2-1
2.1.4 For SC50, SC67 and SC72 Screens .....................................................................................2-2
2.1.5 For PE50, PE67 and PE72 Pedestals ...................................................................................2-2
2.1.6 For RPMX-D132U, RPMSP-D132U, or RPMSP-D180U Projectors.................................2-2
2.1.7 For Entero RPMSP/RPMWU-LED01 Projectors................................................................2-2
2.1.8 Additional Tools Required...................................................................................................2-3
2.1.9 Service and Support .............................................................................................................2-3

2.2 Installation ...................................................................................................................................2-3

2.2.1 Step 1 - Unpack Cube Enclosures and Pedestals.................................................................2-3
2.2.2 Step 2 - Unpacking and Stabilizing Screens........................................................................2-4

Preparing Screens for Installation .........................................................................................2-4

2.2.3 Step 3 - Unpacking and Preparing Projectors for Installation .............................................2-4

RPMX/SP-D132U / RPMSP-D180U  ...................................................................................2-4
RPMSP-LED01/RPMWU-LED01 Projectors ......................................................................2-5

2.2.4 Step 4 - Assembling the Pedestals .......................................................................................2-6

Tools and Hardware Required ..............................................................................................2-6
Constructing a PE50/PE67/PE72 Platform (Multiple Pedestals)  .........................................2-7

2.2.5 Step 5 - Installing Display Cube Enclosures .......................................................................2-8

Tools and Hardware Required ..............................................................................................2-8
Installation Tips  ....................................................................................................................2-9
Adding the First Row of Display Cube Enclosures ..............................................................2-9
Adding Additional Rows of Display Cube Enclosures  ........................................................2-10

2.2.6  Step 6 - Apply Permanent External Support.......................................................................2-12

Examples of External Supports  ............................................................................................2-12

2.2.7 Step 7 - Install Display Screens ...........................................................................................2-13

Tools and Hardware Required ..............................................................................................2-13

2.2.8 Step 8 - Install Projectors into Cube Enclosures..................................................................2-15

Summary of Contents for CC50-2301

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands