manualshive.com logo in svg

Christie CC50-2301, Installation Manual

Share
Download
Christie CC50-2301 Installation Manual Download Page 16

2-6

CC50-2301/CC67-3001/CC72-3301 Installation Manual

020-100248-03 Rev. 1 

Section 2: Installation and Setup

2. Ensure that the Lens Lock screw is tight.

 Figure 2-5 Lens Lock Screw

NOTE:

 If the lens has been removed, tighten the Lens Lock screw before fastening the 2x M6 Lens Mount 

screws to ensure optical alignment.

2.2.4  Step 4 - Assembling the Pedestals 

It is strongly recommended that PE50/PE67/PE72 pedestals be used to create the platform for a CC50/CC67/
CC72 display wall. These pedestals are designed specifically to support the CC50/CC67/CC72 cube enclosures 
to their maximum stacking limit. Before assembling the pedestal, ensure you have the correct pedestal model 
for your display cube. A CC50 display cube requires a PE50-3602 pedestal, a CC67 requires a PE67-3602 
pedestal and a CC72 requires a PE72-3601 pedestal. Make sure all pedestal models are the same, since there 
are various pedestal heights available.

Tools and Hardware Required

• Level
• 10mm hex wrench or socket driver 
• (4) M6 x 75mm hex screws
• (8) M6 x 18mm flat washers
• (4) lock washers
• (4) M6 hex nuts 
• (4) cable covers

NOTICE!

 

Depending on the size of the wall, assemble the platform beginning with the center two pedestals 

working outwards to the end of each row.

Summary of Contents for CC50-2301

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands