Christ RVC 2-18 CDplus Operating Manual Download

Page: 42 / 84

Rotational Vacuum Concentrator RVC 2-18 CDplus

HCl resistant version

6 Operation

42 / 84

Version 04/2012, Rev. 2.3 of 03/07/2017

• sb

Translation of the original operating manual

Lid status (13)

The lid is open.

The lid is closed.

The lid is not completely closed.
• Press both sides of the lid down in order to close the lid

completely.

Operating mode (14)

The rotational vacuum concentrator is in the standby mode.

All aggregates are switched off.

The rotational vacuum concentrator is in the run mode. The
timer is deactivated.

The rotational vacuum concentrator is in the run mode. The
timer is activated.

Active phases (15)

Open lid

The rotor is at a standstill, and the lid can be opened.

Warm-up

The vacuum pump and/or the cooling trap are in the warm-
up phase.

Evaporation
manual

The RVC is in a manual-controlled evaporation run.

Pending information (16)

If any messages are pending, the info icon flashes every
second to draw the user's attention to error messages,
process messages, or general information concerning the
process or the unit.

The messages can be displayed in the process and
equipment information window (see chapter 6.5.3.2 -
"Process and equipment information")

Summary of Contents for RVC 2-18 CDplus





















































































Search results

Summary of Contents for RVC 2-18 CDplus

Reviews:

Related manuals for RVC 2-18 CDplus

Brands by name

Popular brands

Christ RVC 2-18 CDplus, Operating Manual

Search results

Summary of Contents for RVC 2-18 CDplus

Reviews:

Related manuals for RVC 2-18 CDplus

Brands by name

Popular brands