Rotational Vacuum Concentrator RVC 2-18 CDplus
HCl resistant version
6 Operation
44 / 84
Version 04/2012, Rev. 2.3 of 03/07/2017
• sb
Translation of the original operating manual
• Close the lid. A menu appears:
Fig. 24: Selection for continuing the evaporation
• Continue the process by selecting the desired phase.
Stopping the warm-up phase prematurely
During the warm-up phase, the functions "Open lid", "Continue with phase",
or "Stop warm-up" can be selected with the left-hand function key "mode".
If one of these functions is selected, the warm-up phase will be stopped
prematurely.
Evaporation manual
If the unit is in the standby mode, the evaporation phase can be started
directly without a warm-up phase. For this purpose, select from the menu
"Start with phase" the item "Evaporation manual".
Stopping the evaporation process prematurely
If the timer is active, the evaporation process will be stopped automatically
when the preset time is over. The process can also be aborted manually.
• Open the menu "Select mode" with the left-hand function key.
• Select the function "Stop evaporation".
• Press the right-hand function key to confirm.
Fig. 25: Stopping an evaporation process
In order to stop the evaporation process, the chamber is completely
aerated and the rotor is brought to a standstill. Then, the system inquires as
to whether the lid should be opened.
Fig. 26: Message after stopping an evaporation process
