Freeze-dryer Epsilon 2-6D LSCplus
6 Operation
66 / 156
Version 07/2022, Rev. 3.0 of 20/07/2022
• sb
Translation of the original operating manual
Dialog box "Operating mode: select/start" (8)
After the set values have been entered for the process, the process can be
started manually with this function (see chapter 6.6.2 - "Manual freeze-
drying").
Fig. 26: Dialog box "Operating mode: select/start" (The version of the dialog box that is
displayed depends on the equipment of the freeze-dryer.)
Button "Standard unit test"
Apart from the process phases of the freeze-drying process ("Freezing",
"Warm-up", "Main drying", and "Final drying") and the operating mode
"Defrosting", the button "Standard unit test" is also available. This button
opens a selection of various tests with fixed parameters. After consultation
with the manufacturer, these tests can be performed in order to check the
functionality and processes of the freeze-dryer.
NOTE
Some of the available tests are also provided in the form of program
templates (see chapter 6.6.3.1 - "Creating a program").
Pos : 181 /010 Univ ers almodul e/ Seit enwechs el @ 0\mod_1202116244312_0.docx @ 105 @ @ 1
Pos : 182 /010 Univ ers almodul e/ Leerz eile @ 0\mod_1202116244500_0.docx @ 114 @ @ 1
Pos : 183 /200 Chris t/610 Servic ehandbuch neu (Standar dmodul e)/ 080 St euerung/ LSC plus/080-0010-0020b Pil ot- und Produkti ons anlagen Teil 2 @ 72\mod_1593156992719_68.docx @ 767136 @ @ 1
Fig. 27: Possible system tests
