Freeze-dryer Epsilon 2-6D LSCplus
8 Maintenance and service
Version 07/2022, Rev. 3.0 of 20/07/2022
• sb
119 / 156
Translation of the original operating manual
CAUTION
Do not clean the film while dry.
• Use soft cloths, soft sponges made of synthetic fibres or rubber
squeegees and common household cleaning agents (glass cleaner) for
cleaning. The cleaning agents must be free from abrasive agents.
• Do not use hard sponges, cloths or brushes for cleaning.
• Avoid strong mechanical stress during cleaning.
Pos : 248 /010 Univ ers almodul e/ Leerz eile @ 0\mod_1202116244500_0.docx @ 114 @ @ 1
Pos : 249 /200 Chris t/360 GT-BA Labor-Pil ot ( STAND ARDMO DULE)/080 W artung und I nst andhaltung/ 080-0010- 0022-0020 T üversc hl ussriegel Epsilon @ 25\mod_1404984677136_68. doc x @ 185889 @ 4 @ 1
→
8.1.3.2
Door latch
There is a slide pad on the door latch of the loading door. This slide pad is
included in the scope of supply as a spare part (part no. 18189991). It must
be inspected regularly for signs of wear. When its thickness is < 0.5 mm, it
must be replaced.
1
Door latch
2
Slide pad
3
Torx screws
Fig. 73: Door latch and slide pad
Replacing the slide pad:
Unscrew the two screws of the slide pad with a Torx
®
TX10 screwdriver,
remove the old slide pad, and install the new one.
Pos : 250 /010 Univ ers almodul e/ Seit enwechs el @ 0\mod_1202116244312_0.docx @ 105 @ @ 1
