INST.No.INE-475-P1CE Software Version 1.00
-C1-
Contents
Preface
Important operational instructions
Warnings and cautions
1. Introduction ·························································· 1
1.1 General·························································· 1
1.2 Configuration················································ 1
2. Models and accessories ········································ 2
2.1 Models ·························································· 2
2.1.1 Detector unit ················································· 2
2.1.2 Accessories ··················································· 2
2.2 Attachments ·················································· 2
3. Installation····························································· 3
3.1 Setting
dipswitches ······································· 3
3.1.1 Connecting this detector unit to
the operator interface/display unit ········ 3
3.1.2 Connecting this detector unit to
a personal computer ······························ 3
3.2
Mounting the air-purge hood IR-WEA········· 4
3.2.1 Mounting the hood on this detector unit······· 4
3.2.2 Adjusting the hood length····························· 4
3.2.3 Purge air························································ 4
3.3
Cooling this detector unit
(water-cooling or air-cooling) ··············· 4
3.4
Installing this detector unit ··························· 5
3.5
Cautions before installation ························ 6
3.5.1 Vibration or shock········································· 6
3.5.2 Magnetic disturbances ·································· 6
3.5.3 Working temperature and humidity ·············· 6
3.5.4 Sight path ······················································ 6
3.5.5 Installation (for objects of
powders or granular substances) ·············· 6
3.5.6 Installation (for objects in sheet
such as papers, etc.) ································ 6
4. Connections ··························································· 7
4.1 Laying
cables ················································ 7
4.2 Single-detector-unit
connection ···················· 7
4.3 Multiple-detector-units
connection··············· 8
4.3.1 Relaying boxes used ····································· 8
4.3.2 Relaying boxes not used ······························· 9
5. Names and functions ·········································· 10
5.1
Names and functions of
detector unit components ···················· 10
5.2
Names and functions of data display parts · 11
5.3 Terminal
portion ········································· 11
6. Operation ·····························································12
6.1
Confirmation before operation ··················· 12
6.2
Setting detector unit numbers ····················· 12
6.3
Setting calibration curve data ····················· 13
6.3.1 Data for setting ··········································· 13
6.3.1-1) List of setting data··································· 13
6.3.1-2) Function of setting data··························· 14
6.3.2 Procedure for setting··································· 15
6.3.3 Correcting calibration curves ····················· 15
6.4
Setting operating conditions ······················· 16
6.4.1 Data for setting ··········································· 16
6.4.1-1 Description of setting data························ 18
6.4.2 Procedure for setting operating conditions · 20
6.4.3 Setting data in the engineering mode ········· 20
6.5
Setting calibration curve number of
each constituent number····················· 21
6.5.1 Setting constituent number ························· 21
6.5.2 Setting calibration curve number················ 21
6.6 Calibration ·················································· 22
6.6.1 Absorbance display mode settings ············· 22
6.6.2 Calibration ·················································· 22
6.7
Setting output limit values of
calibration curves································ 23
6.7.1 Data for setting limit values of
calibration curves································ 23
6.7.2 Procedure for setting data for output limit
values of calibration curves················ 24
6.7.2-1 Setting the calibration curve numbers (CH) ··24
6.7.2-2 Enabling/disabling the output
limit processing (LM)························· 24
6.7.2-3 Setting a low limit absorbance value (XL)
and a low limit measured value (YL)·············24
6.7.2-4 Setting a high limit absorbance value (XH)
and a high limit measured value (YH)···········24
6.7.2-5 Setting output limit values to
other calibration curve numbers············· 24
！
！
！
