Instruction Manual
Safe-Keeper
7
C. Set Level 2 Security (Recommended for Fixed Installations)
Eight seconds of continuous motion (e.g. movement, jarring, or vibration) and/or cable-tampering causes the Safe-Keeper to
sound. If eight seconds of continuous motion is detected, the Safe-Keeper chirps a warning sound and the LED indicator shines red
for three seconds. Next, the alarm sounds for 45 seconds or until deactivated. After 45 seconds, the alarm automatically resets and
it will sound again repeatedly at 45-second intervals until it is deactivated or the battery is exhausted.
If the cable is tampered with, the Safe-Keeper will sound continuously until it is deactivated or the battery is exhausted.
At this level, the LED indicator flashes green twice per second. Select Level 2 Security as follows:
1. Perform steps 1 through 4 of Set Level 1 Security.
2. Press the Activation button on the front of your
Safe-Keeper once to reset to Level 2 Security.
3. Make sure you hear two beeps to confirm Security Level 2 is
set. The LED indicator will flash red 8 times in 8 seconds,
allowing the Safe-Keeper to be set at Level 3 security during
this time. If the security level is not reset within 8 seconds, the
LED indicator will flash green at twice per second continually,
confirming the Safe-Keeper is armed at Level 2.
D. Set Level 3 Security (with motion detection deactivated) Cable Continuity Only
If the cable is cut, the Safe-Keeper will sound continuously until it is deactivated or the battery is exhausted.
At this level, the LED indicator flashes green once per second. Select Level 3 Security as follows:
1. Perform steps 1 through 4 of Set Level 1 Security.
2. Press the Activation button on the front of your
Safe-Keeper twice to reset to Level 2 Security.
3. Make sure you hear a beep to confirm Security Level 3 is set
and the LED indicator flashes green at once per second contin-
ually, confirming the Safe-Keeper is armed at
Level 3.
E. Increase Security Level
Security levels can be reset only in diminishing levels (1 to 3). Increase security levels as follows:
1. Set the Number Dials to combination.
2. Press the Black Release button to unhook Cable Head.
3. Follow instructions for Set Level 1 Security.
