8
Instruction Manual
Safe-Keeper
MULTIPLE, FLEXIBLE USES OF YOUR SAFE-KEEPER
The Safe-Keeper, with its included accessories, is adaptable to suit your changing needs. We suggest locating the Safe-Keeper in
the most obscure location whenever possible. The following uses are only suggestions, and the uses for your Safe-Keeper are lim-
ited only by the physical limitations of your application and your innovation.
* Use the cable to tether the Safe-Keeper and your projector/display to the SA-1 Security Anchor.
* Use the Chief Security Anchor to tether the Safe-Keeper and your projector/display to a mount.
* Use the cable to tether the Safe-Keeper to your projector/display for mobile applications.
* Use the Attachment Plate to secure your Safe-Keeper to your projector/display.
* Use the Attachment Plate to secure your Safe-Keeper to a stationary location and tether your projector/display.
1. CABLE TETHER USING THE CHIEF SA-1 SECURITY ANCHOR
The Chief Security Anchor allows you to use the NPT pipe or other architectural components as a secure anchor point for the self-
contained cable. Please follow these instructions carefully:
a.
Follow the instructions for adhering the Safe Keeper docking
station to your Projector or Display.
b. Unpack and disassemble the Chief Security Anchor (see
Table 1 and Figure7).
NOTE: The U-bolt and clamping saddle must be located within 17” of the cable end of the Safe Keeper
c.
Place the U-bolt and clamping saddle around the NPT pipe or
other architectural component and thread the nuts onto the
threaded ends of the U-bolt until they are
finger tight
.
Table 1: Security Anchor Parts
Item
Nomenclature
Quantity
1
U-bolt
1
2
Clamping Saddle
1
3
Nut
2
4
Security Shroud
1
1
2
3
4
Figure 7
