10
Instruction Manual
Safe-Keeper
e.
Insert Cable Head into Locking Hole to activate
Safe-Keeper (see Activating Motion Sensor Alarm).
f.
To remove Safe-Keeper from Mounting Plate, press and hold
Green Trigger button and slide Safe-Keeper off.
4. PROJECTOR SLOT ATTACHMENT ADAPTER
The Projector Slot Attachment Adapter (see Figure 9) is designed to be attached directly into a projector/display designed with a
Projector Slot Attachment Adapter slot (Kensington Lock), usually found on the side or back of the projector (see Figure 10). Not
all projectors are equipped with the proper Projector Slot Attachment Adapter slot and the Projector Slot Attachment Adapter can
be used only on models specifically designed to accept this attachment.
If using the Projector Slot Attachment Adapter, follow these directions:
a.
Slide Projector Slot Attachment Adapter into projector/display
until Projector Slot Attachment Adapter’s black spring cover-
ing fits securely against projector/display.
b. Push and turn ribbed knob of the Projector Slot Attachment
Adapter clockwise to engage the feet and align holes into posi-
tion, allowing the cable to pass through holes of Projector Slot
Attachment Adapter (see Figure 11).
c.
Pass the cable through the holes of the Projector Slot Attach-
ment Adapter, loop the cable around an immovable object, and
push the Cable Head into the Locking Hole.
d. Set the security level (see page 6).
Ribbed Knob
Cable Holes
Black Spring Cushion
Feet
Figure 9
Figure 11
Figure 10
Insert Projector Slot Attachment here
Indicates Kensington Lock for Projector Slot Attachment
