Instruction Manual
Safe-Keeper
3
1. BATTERY
Your Chief Safe-Keeper is powered by one conventional 9-volt battery (included).
A. Battery Installation/Replacement
For security, the battery compartment (see Figure 1) can only be opened when the Safe-Keeper is unlocked and deactivated. Install
or replace the battery as follows:
1. Set the dials to your combination (original factory preset com-
bination is 0-0-0).
2. If cable is connected, push cable release button to release cable
and press Green Trigger button to retract cable (see Figure 2).
3. If necessary, press and hold Green Trigger button and slide
Attachment Plate from the Safe-Keeper (see
Figure 3).
4. Press and hold Green Trigger button, place finger in indenta-
tion in battery compartment latch, and open battery compart-
ment by pulling up latch.
5. Attach 9-volt battery and insert battery into battery compart-
ment.
6. Hold Green Trigger button and snap battery compartment
cover in place.
7. Make sure cover is secure by trying to remove cover without
pressing the Green Trigger button.
B. Battery Life
Chief Manufacturing suggests a battery check every 3 to 6 months. Replace the battery every six months or when the Safe-Keeper
low battery alert is activated, whichever occurs first. When battery power is nearly depleted, the Safe-Keeper LED indicator will
glow red and the Safe-Keeper will, one time only, emit five steady beeps. If the LED indicator is glowing red, replace the battery
immediately to maintain uninterrupted security.
Cable
Release
Button
Attachment
Plate
Battery
Cover
Green
Trigger
Button
Button
Figure 2
Figure 3
Green
Trigger
Button
Cable
Release