4
Instruction Manual
Safe-Keeper
2. COMBINATION LOCK
The original factory preset combination is 0-0-0. The combination lock activates three components of the Safe-Keeper:
* Locks the retractable cable in place, activating the Safe-Keeper.
* Locks the battery compartment, preventing unauthorized de-arming of the Safe-Keeper.
* Locks the Safe-Keeper to its mounting plate.
A. Deactivation
Deactivate the Safe-Keeper at any time by preforming the following:
1. If still factory set, set the Number Dials to 0-0-0, otherwise set
the Number Dials to your combination.
2. Press the Black Release button to unhook Cable Head (see Fig-
ure 4).
B. Setting or Changing the Combination
To change the combination at any time, set the Number Dials to the current combination and perform the following:
CAUTION:
Treat your combination like any personal identifica-
tion number (PIN). Record your combination and store it in a safe
place, separate from Safe-Keeper.
1. With the cable fully retracted, press the Cable Head into the
cable storage hole until it stops (see Figure 5).
2. Turn the Number Dials to select the desired combination.
3. Press and hold the Green Trigger button and pull the Cable
Head out of the Locking Hole.
The new combination is now set and the Safe-Keeper is ready to
use.
CAUTION:
To maintain the security of your Safe-Keeper, rotate
the dials on the lock to random numbers after every activation or
when not in use.
Green
Trigger
Button
Black
Release
Button
Figure 4
Figure 5
Press in
