background image

Instruction Manual

Safe-Keeper

1

 IMPORTANT WARNINGS AND CAUTIONS!                                                             

WARNING:A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.

CAUTION:A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the correspond-
ing instructions.

CAUTION:

  To maintain the security of your Safe-Keeper, treat you combination like any PIN. Record your combination and 

store it in a safe place, separate from Safe-Keeper.

CAUTION:

  Test the unit for shipping damage.

NOTE: In some buildings, normal architectural movement may be sufficient to trigger the motion detec-
tor. In these cases, or for use in areas where earthquakes are common, we recommend use of the “cable 
continuity only” mode and the 

Projector Slot Attachment Adapter (see page 

10

)

.

NOTE: When triggered, this alarm sounds 

very loudly

. We recommend you familiarize yourself with its 

operation in a location where accidental triggering will not disturb others.

CONTENTS                                                                                            

GETTING STARTED

 

 .............................................

2

Battery ............................................................ 3
    

Battery Installation/Replacement ............................

3

    Battery Life  ..............................................................

3

Combination Lock  ......................................... 4

    Deactivation  .............................................................

4

    Setting or Changing the Combination ......................

4

Retractable Cable ........................................... 5

    Operation ..................................................................

5

    Deactivation  .............................................................

5

Activating Motion Sensor Alarm

 ...................... 6

Deactivation ................................................... 6
Set Level 1 Security (Default Setting) ........... 6
Set Level 2 Security ....................................... 7
Set Level 3 Security........................................  7
Increase Security Level .................................. 7

MULTIPLE, FLEXIBLE USES OF 
YOUR SAFE-KEEPER

 ..................................... 8

Cable Tether Using the Chief SA-1
Security Anchor  .............................................  8
Cable Tether for Mobile Applications ............  9
Attachment Plate............................................. 9
Projector Slot Attachment Adapter................. 10

Summary of Contents for Safe-Keeper












Reviews: