Installation Instructions
CTV-3036
7
STEP 2
Figure 5. Adjust Button Plate on Side Plate
Figure 6. Install Roll Out Covers
Figure 7. Install Foam Pads
Adjusting the Button Plates on Side Brackets
Adjust button plates on side plates, as follows:
1. Determine the height of your monitor. If necessary,
use a tape measure.
2. Attach mounting button (60) and button plate (50) to
bottom side bracket (40) using the correct hole
depending on screen height. See Figure 5.
3. Repeat procedure for second side bracket.
Installing Covers on Roll Out Brackets
Install covers on roll out brackets, as follows:
1. Install roll out cover (80) on roll out bracket (70).
See Figure 6.
2. Repeat procedure for other roll out bracket.
Installing Pads on Top Placement Brackets
Install foam pads on top placement brackets, as follows:
1. Locate both top placement brackets (90) and the
foam pads (100).
2. Remove the protective strip to expose the adhesive
on the foam pad (100).
3. Carefully apply the foam pad (100) on the top
placement bracket (90) as shown in Figure 7.
4. Repeat procedure for other top placement bracket.
(90)
(100)
(70)
(80)
