Installation Instructions
CTV-3036
6
INSTALLATION INSTRUCTIONS
STEP 1
Figure 3. Attach End Trays to Center Tray
Figure 4. Interlock the Flanges on Center Tray
Assembling the Tray Assembly
Assemble the tray assembly, as follows:
1. Attach each end tray (20 and 30, Figure 3) onto the
center tray (10) by interlocking the flanges on the
center tray (Figure 4).
2. Align the holes and slots and insert four M5 X 8mm
Phillips cap screws (CC) and flat washers (DD)
through the bottom as shown in Figure 3.
NOTE:
The tray assembly will be adjusted to fit your
monitor at a later step.
3. Attach the cap screws (CC) and washers (DD)
loosely. These parts will be tightened later.
(20)
(30)
(10)
(DD)
(CC)
(10)
(20)
