background image

Installation Instructions 

CTV-3036 

 

 

3

IMPORTANT WARNINGS and CAUTIONS!

 

WARNING 

A WARNING alerts you to the possibility of serious injury or death if you do not 
follow the instructions.

 

CAUTION 

A

 CAUTION

 alerts you to the possibility of damage or destruction of equipment if you do 

not follow the corresponding instructions.  

WARNING 

Improper installation can result in serious personal injury! Make sure that the 
mounting surface can support a redundant weight factor 

five times

 the total weight of 

the equipment: if not, reinforce the mounting surface structural members before 
installing the mount.

  

WARNING 

Be aware of the potential for personal injury or damage to the equipment if it is not 
adequately mounted.  Refer to 

Table 1. Mount Specifications

 on page 2 for the weight of 

the mount without a display.

  

WARNING 

The installer is responsible for verifying that the mounting surface to which the 
mount is anchored will safely support the combined load of all attached components or 
other equipment.

  

WARNING 

The combined weight of the TV/monitor placed on the mount must not exceed the 
maximum support weight of the mount. Refer to 

Table 1. Mount Specifications

 on page 

2 for the weight of the mount without a display.

 

WARNING 

Watch for pinch points. Do not put your fingers between movable parts. 

CAUTION 

Check the unit for shipping damage before you begin the installation.  

 

CONTENTS 

 

MOUNT SPECIFICATIONS ...........................................2

 

TOOLS REQUIRED FOR INSTALLATION..................4

 

SHIPPING CONTENTS...................................................4

 

PARTS ..............................................................................5

 

INSTALLATION INSTRUCTIONS................................6

 

Assembling the Tray Assembly.....................................6

 

Adjusting the Button Plates on Side Brackets...............7

 

Installing Covers on Roll Out Brackets.........................7

 

Installing Pads on Top Placement Brackets ..................7

 

Assembling the Side Brackets .......................................8

 

Attaching Side Brackets to End Trays...........................9

 

Placing the Monitor on the Center Tray ........................10

 

Assembling the Top Center Bracket..............................11

 

Attaching Support Brackets to Center Bracket..............11

 

Attaching Center Tray ...................................................12

 

Installing Quick-Connect Bracket .................................13

 

Connect and Secure CTV Mount ..................................13

 

Disconnect and Remove CTV Mount ...........................14

 

 

Summary of Contents for CTV-3036















Reviews: