Chicago Pneumatic CPF 175, Instruction Book

Page: 62 / 152

Structure Definition Minimum Maximum
Signifies that an error will be
generated if the pressure
crosses 9.0 bar (130.5 psi). > value of
next
parameter Limit P maxi of
this parameter
Corresponding to the pressure
(7.5 bar (108 psi)) at which a
pre-alarm will be displayed for
informing the user that a
protection limit is being
approached. 0 bar (0 psi) < value of the
above
parameter
The pressure must cross the
maxi threshold plus 5 seconds
(value of this parameter) when
an error will be generated. 0 s 10 s
This parameter defines the
maxi value that can be set for
the parameter shd.Maxi. 0 bar (0 psi) 17 bar (246.5
psi)
Signifies that the compressor
cannot start as long as the tank
pressure is higher than this
value (1.5 bar (21.7 psi)) 0 bar (0 psi) 2.5 bar (36 psi)
This parameter defines the
maximum value that can be set
for the parameter P start.Maxi. 0 bar (0 psi) 17 bar (246.5
psi)
Element outlet
Protects the input Temperature at element outlet. Analog input corresponding to the temperature sensor
installed at the outlet of the compression element, taking AIR-OIL temperature at the highest point.
Instruction book
60 2920 1804 00