manualshive.com logo in svg

Chicago Pneumatic CPF 175, Instruction Book

Share
Download
Chicago Pneumatic CPF 175 Instruction Book Download Page 45

Variable speed compressors

When there is a warning, the error LED is lit fixed. A message flashes on the last line of the screen STATUS
0.1 stipulating the type of warning:

• Alarm
• Sensor error
• Pre-alarm
• Fault
• Key absent
• Internal fault
• Starting fault

Pressing the enter key shows the Error menu and the parameter corresponding to the type of warning flashes.
This indicates the menu that has to be entered in order to identify the input port of the warning and the
protection that is activated.

When the cause of the warning has been removed, the flashing message of the menu Status 0.1 disappears
and the message All conditions are OK is displayed on the Error menu.

When an error occurs, the compressor stops and the screen displays the name of the input in fault as well as
the cause of the error. For example:

Instruction book

2920 1804 00

43

Summary of Contents for CPF 175

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands