Chicago Pneumatic CPF 175, Instruction Book

Page: 117 / 152

Control panel
Control panel
Step Action
1 Regularly check the display for readings and messages. Normally, the main display is
shown, indicating the compressor outlet pressure, the status of the compressor and the
functions of the keys below the display.
2 Always check the display and remedy the problem if alarm LED (7) is lit or flashing.
3 The display will show a service message if a service plan interval has been exceeded or
if a service level for a monitored component has been exceeded. Carry out the service
actions of the indicated service plans or replace the component and reset the relevant
timer.
4 Regularly check the actual compressor status by pressing the arrow down key from the
main screen.
5.6 Stopping
Important
After pressing stop button (9), the compressor will run unloaded for 30 seconds. The
compressor stops after this period. A start command during this period is ignored.
After stopping, the compressor is prevented from restarting within a programmable time
(20 seconds). A start command given during this minimum stop time will be memorised;
the automatic operation LED lights up. The compressor will start when the minimum stop
time has elapsed.
Instruction book
2920 1804 00 115