Chevrolet Tavera BS3, Owner'S Manual

Page: 95 / 228

2. Crank up the engine by turning the starter switch key fully clockwise. Release
the key as soon as the engine starts. The key will return automatically to
"ON."
3. After starting the engine, let it run for about 1 to 2 minutes with idle speed
(avoid acceleration or driving off the vehicle) . This allows oil to circulate and
lubricate the turbocharger. Then depress the accelerator pedal part way
down.
Do not keep the starter engaged for more than 30 seconds at a time. If the starter
is operated repeatedly, but the engine does not start, check the fuel system and
electrical system. During repeated cranking, it is absolutely necessary to have
brief periods of recovery time (about 30 seconds) to conserve the battery.
CAUTION
At low ambient temperature or when the vehicle has not been used for a long period,
normal engine oil pressure and flow is affected. Under these conditions the engine
should be started and allowed to idle for a few minutes before operating at higher rpm.
NOTE
89