Chevrolet Tavera BS3 Owner'S Manual Download Page 26

Page: 26 / 228

Fuel gauge

The fuel gauge indicates the level of fuel within the fuel tank when the starter

switch is “ON”.

The letters “F” and “E” represent “Full” and “Empty” respectively. When the key is

turned to the “OFF” position the needle does not return to the (empty) mark but

remains to indicate the approximate fuel level. Movement of the fuel within the

fuel tank causes the fuel gauge pointer to move when you brake, accelerate or

turn. The indication is not linear and only indicative.

NOTE

When the ignition is switched “ON” fuel gauge needle goes to E level
and then returns to show the fuel level.

Engine tachometer

The engine tachometer indicates the engine speed in rpm. The red colored zone
represents critical engine speed.

Never operate the vehicle with the tachometer needle in the red zone. Continued

operation with the tachometer needle in the red zone can lead to engine damage.

NOTE

All gauges will self test by deflecting initially when ignition is switched on.

CAUTION

x1000 r/min

Summary of Contents for Tavera BS3





































































































































































































































Search results

Summary of Contents for Tavera BS3

Reviews:

Related manuals for Tavera BS3

Brands by name

Popular brands

Chevrolet Tavera BS3, Owner'S Manual

Search results

Summary of Contents for Tavera BS3

Reviews:

Related manuals for Tavera BS3

Brands by name

Popular brands