Chevrolet Tavera BS3 Owner'S Manual Download Page 22

Page: 22 / 228

9 seater

Specification

Seating Position

Sr. No.

One person in the driver seat

The driver, plus one passenger in the front seat farthest from
the driver

The driver, one passenger in the front seat farthest from the
driver, all the seats farthest to the rear occupied

All the seats occupied

All the seats occupied, plus an evenly distributed load in the
luggage boot, in order to obtain the permissible load.

Driver plus an evenly distributed load in the boot

8 seater

7 seater

For any other loading condition, adjust the switch to a position so as not to
be dazzle oncoming traffic/other vehicles ahead.

Specification

Seating Position

Sr. No.

One person in the driver seat

The driver, plus one passenger in the front seat farthest from
the driver

The driver, one passenger in the front seat farthest from the
driver, all the seats farthest to the rear occupied

All the seats occupied

All the seats occupied, plus an evenly distributed load in the
luggage boot, in order to obtain the permissible load.

Driver plus an evenly distributed load in the boot

Specification

Seating Position

Sr. No.

One person in the driver seat

The driver, plus one passenger in the front seat farthest from
the driver

The driver, one passenger in the front seat farthest from the
driver, all the seats farthest to the rear occupied

All the seats occupied

All the seats occupied, plus an evenly distributed load in the
luggage boot, in order to obtain the permissible load.

Driver plus an evenly distributed load in the boot

Summary of Contents for Tavera BS3





































































































































































































































Search results

Summary of Contents for Tavera BS3

Reviews:

Related manuals for Tavera BS3

Brands by name

Popular brands

Chevrolet Tavera BS3, Owner'S Manual

Search results

Summary of Contents for Tavera BS3

Reviews:

Related manuals for Tavera BS3

Brands by name

Popular brands