Chevrolet Tavera BS3 Owner'S Manual Download Page 17

Page: 17 / 228

Windshield Wipers

To operate the windshield wiper, turn the ignition ON and move the windshield

wiper / washer lever downward. The windshield wipers operate in the following

four position :

Do not operate the wipers when the windshield is dry. It may

the

windshield glass. Check blades are not frozen to windows before operating in

cold weather. This can damage the wiper motor.

Dust on windshield or on blade reduces the wiper blade life significantly and may

cause streak marks on windshield during wiping. In case the vehicle is not used

for more than a week or if dust is accumulated on windshield or wiper, clean the

windshield and blade before using the vehicle. To clean the blade lift the blade to

service position and wipe the lip of rubber element with clean soft cloth.

scratch

OFF

INT

: System off. Default position.

: Intermittent operation. Lever down one level

: Continuous wipe, slow speed. Lever down two levels.

: Continuous wipe, fast speed. Lever down three levels.

REAR

OFF

PULL

OFF

MIST

INT

OFF

MIST

Mist Function

To operate the windshield wiper once in case of light rain or mist, lightly move the
windshield wiper / washer level towards the MIST position.
The wipers will operate through one cycle.

CAUTION

Summary of Contents for Tavera BS3





































































































































































































































Search results

Summary of Contents for Tavera BS3

Reviews:

Related manuals for Tavera BS3

Brands by name

Popular brands

Chevrolet Tavera BS3, Owner'S Manual

Search results

Summary of Contents for Tavera BS3

Reviews:

Related manuals for Tavera BS3

Brands by name

Popular brands