Chevrolet Tavera BS3 Owner'S Manual Download Page 43

Page: 43 / 228

Foot outlet and defroster

Air is delivered from the foot outlet with a small amount from the defroster outlets

and the side window defroster outlets.

Defroster

Air is delivered from the defroster outlets with a small amount delivered from the

side window defroster outlets. This position is recommended for conditions of

severe fogging and icing only.

OPERATING TIPS - The windshield defrosting and defogging system assist in

providing good visibility through the critical area of the windshield under most

inclement weather conditions. The windshield should be scraped clear, if coated

with ice or snow.

Summary of Contents for Tavera BS3





































































































































































































































Search results

Summary of Contents for Tavera BS3

Reviews:

Related manuals for Tavera BS3

Brands by name

Popular brands

Chevrolet Tavera BS3, Owner'S Manual

Search results

Summary of Contents for Tavera BS3

Reviews:

Related manuals for Tavera BS3

Brands by name

Popular brands