Chevrolet 2013 Cruze, Owner'S Manual, Page: 215 / 292

Switching Between Calls (Call
Waiting Calls Only)
To switch between calls turn and press
the TUNE/MENU or MENU/SELECT
knob and select Switch Call or select
Switch Call on the screen.
Call Waiting Using Steering Wheel
Controls
Call waiting must be supported on the
cell phone and enabled by the wireless
service carrier.

Press , , , or to answer
an incoming call when another call
is active. The original call is placed
on hold.

Press , , or again to
return to the original call.

To decline answering the incoming
call, press Decline on the screen or
take no action.

Press to disconnect the curr-
ent call and switch to the call on
hold.
C o n f e re n c e C a l l i n g U s i n g t h e
Infotainment Controls
Conference calling and three-way
calling must be supported on the
Bluetooth phone and enabled by the
wireless service carrier to work. This
feature is only supported when the
vehicle is not moving.
To start a conference while in a current
call:
1. Turn and press the TUNE/MENU or
MENU/SELECT knob and select
Enter Number.
2. Enter the phone number and select
OK.
3. After the call has been placed, turn
the TUNE/MENU or MENU/
SELECT knob and choose Merge
Calls.
4. To add more callers to the confe-
rence call, repeat Steps 1−3. The
number of callers that can be added
is limited by your wireless service
carrier.
Ending a Call
Using the Infotainment Controls
Turn and press the TUNE/MENU or
MENU/SELECT knob and select Hang
Up or press Hang Up on the screen.
Using Steering Wheel Controls
Press .
Muting a Call
During a call, all sounds from inside the
vehicle can be muted so that the person
on the other end of the call cannot hear
them.
Using the Infotainment Controls
Turn and press the TUNE/MENU or
MENU/SELECT knob and select Mute
Call. Press again to cancel mute.
Transferring a Call
Audio can be transferred between the
Bluetooth system and the cell phone.
The cell phone must be paired and
210 Infotainment system (LTZ)
connected with the Bluetooth system
before a call can be transferred.
To Transfer Audio from the Blue-
tooth System to a Cell Phone
During a call with the audio in the
vehicle, press the Transfer Call button
on the screen or press and hold the
button on the
steering wheel.
To Transfer Audio to the Bluetooth
System from a Cell Phone
Use the audio transfer feature on the cell
phone. See your cell phone manufac-
turer's user guide for more information.
Press the Transfer Call button on the
screen or press and hold the button
on the steering wheel.
Dual Tone Multi-Frequency (DTMF)
Tones
The in-vehicle Bluetooth system can
send numbers during a call. This is used
when calling a menu-driven phone
system.
Using the Infotainment Controls
1. Turn and press the TUNE/MENU or
MENU/SELECT knob and select
Enter Number.
2. Enter the phone number, or select
Enter Number on the screen and
select digits, then press OK.
Hands-Free Phone
Using Bluetooth Voice Recognition
To use voice recognition, press the
button on the steering wheel. Use
the commands below for the various
voice features. For additional infor-
mation, say “Help” while in a voice
recognition menu.
Making a Call
Calls can be made using the following
commands.
Dial or Call: These commands can be
used interchangeably to dial a phone
number.
Digit Dial: This command allows a
phone number to be dialed by entering
the digits one at a time.
Redial: This command dials the last
number used on the cell phone.
211 Infotainment system (LTZ)