Chevrolet 2013 Cruze, Owner'S Manual, Page: 117 / 292

Rear Vision Camera Location
The camera is above the license plate.
The area displayed by the camera is
limited. It does not display objects that
are close to either corner or under the
bumper and can vary depending on
vehicle orientation or road conditions.
Displayed images may be closer or
farther than they appear.
The folowing illustrations show the
field of view that the camera provides.
When the System Does Not Seem to
Work Properly
The RVC system may not work
properly or display a clear image if:
■ It is dark.
■
The sun or the beam of headlamps
are shining directly into the camera
lens.
■
Ice, snow, mud, or anything else
builds up on the camera lebs. Clean
the lens, rinse it with water, and
wipe it with a soft cloth.
■
The back of the vehicle is in an
a c c i d e n t . T h e p o s i t i o n a n d
mounting angle of the camera can
be affected. Be sure to have the
camer a an d its p o s itio n an d
mounting angle checked at your
dealer.
1. View displayed by the camera.
1. View displayed by the camera.
2. Corner of the rear bumber.
112 Driving and operating
Due to the high position of the camera
the rear bumper can be seen on the
display as a guide to position.
The area displayed by the camera is
limited. The distance of the image that
appears on the display differs from the
actual distance.
The camera is mounted in the tailgate
handle and has a viewing angle of 130°. Warning symbols
Warning symbols are indicated as
triangle on the picture which show
obstacles detected by the rear sensors of
the advanced parking assist.
Caution
Sensitivity of the sensor could be
reduced caused by external influ-
ences e.g. layers on the sensor surface
(ice, snow, mud, soiling, multiple var-
nishing/painting, etc.).
Sensor could detect a non-existing
object ("echodisturbance") caused by
external acoustical disturbances e.g.
another park pilot system.
Sensor could detect a non-existing
object ("echodisturbance") caused by
external mechanic disturbances e.g.
carwash, rain, extreme wind condi-
tions, hail etc.
Performance of the park assistance
systems could be reduced caused by
changing of sensor position by exter-
nal changes to the vehicle, e.g. lower-
ing of the shock absorber over life-
time due to: temperature changes,
changing of tyres, loading of the vehi-
cle, lowering/tuning of the vehicle
etc.
113 Driving and operating