Chevrolet 2013 Cruze, Owner'S Manual, Page: 123 / 292

 Disconnect the clamp from the nega-
tive terminal of the vehicle battery.
Beware that all systems are not func-
tional, e.g. anti-theft alarm system.
Putting back into operation
When the vehicle is to be put back into
operation:

Connect the clamp to the negative
terminal of the vehicle battery.
Activate the electronic of the power
windows.

Check tyre pressure.

Fill up the washer fluid reservoir.

Check the engine oil level.

Check the coolant level.
 Fit the number plate if necessary.
VEHICLE CHECKS
PERFORMING WORK
Warning
Only perform engine compartment
checks when the ignition is off.
The cooling fan may start operating
even if the ignition is off.
RADIO FREQUENCY
IDENTIFICATION (RFID) TAG *
This vehicle is equipped with Radio
Frequency Identification (RFID) tag*,
which can be used for Electronic Toll
Collection (ETC) or any other applica-
tions as decided by the Regulatory
authority. The RFID tag is located on
inside the windshield. Data for necessary
applications will be added by the agency
authorized by the Regulatory authority,
from time to time. Take proper care dur-
ing washing or cleaning of windshield so
as to avoid any damage to the RFID tag.
In case of any damage or malfunction of
RFID tag, or in case of windshield
replacement, contact your CHEVROLET
retailer or agency authorized by the
Regulatory authority for the installation
of new RFID tag.
Caution
Do not touch or peel off. Do not place
any sticker or other metallic components
over the RFID tag neither from inside
nor from outside of the windshield.
Avoid exposure to chemicals or liquid
solvents. This will impair the function of
RFID tag. The RFID tag is tamperproof
and will not function once removed
from windshield.
118 Vehicle care
Push the safety catch to the right and
open the bonnet.
Air intake 95.
Warning
Only touch the foam padding of the
bonnet support rod handle when the
engine is hot.
Secure the bonnet support.
Closing
Before closing the bonnet, press the
support into the holder.
Lower the bonnet and allow it to drop
into the catch. Check that the bonnet is
engaged.
Warning
Always observe the following pre-
cautions: Pull on the front edge of the
bonnet to make sure it is latched
securely before you drive your vehi-
cle.
Do not pull the bonnet release handle
while your vehicle is moving.
Do not move your vehicle with the
bonnet open. An open bonnet will
obscure the driver's vision.
Operating your vehicle with the bon-
net open can lead to a collision result-
ing in damage to your vehicle to other
property, personal injury or even
death.
BONNET
Opening
Pull the release lever and return it to its
original position.
119 Vehicle care