Chevrolet 2013 Cruze, Owner'S Manual, Page: 132 / 292

TAIL LIGHTS
1. Open both covers.
If the side turn signal lamp in the
outside rearview mirror (OSRVM) is
not operated, have the checked by
CHEVROLET retailer.
SIDE TURN SIGNAL LAMPS
(OSRVM)
3. Remove tail light assembly. Take
care that the cable duct remains in
position.
4. Reverse light ( 1 )
Turn signal light (
2
)
Tail light / brake light (
3
)
5. Rotate bulb holder anti-clockwise.
2. Unscrew both screws.
128 Vehicle care
6. Remove bulb holder. Push bulb into
socket slightly, rotate anticlockwise,
remove and renew bulb.
7. Insert bulb holder into the tail light
assembly and screw into place.
Connect wiring plug. Install tail
light assembly in body and tighten
screws. Close covers and engage.
8. Switch on ignition, operate and
check all lights.
NUMBER PLATE LIGHTS
2. Remove bulb housing downward,
taking care not to pull on the cable.
Rotate bulb holder anti-clockwise
to disengage.
3. Remove bulb from holder and renew
bulb.
4. Insert bulb holder in bulb housing
and rotate clockwise.
5. Insert bulb housing and secure using
a screwdriver.
1. Unscrew both screws.
129 Vehicle care