Chevrolet 2011 Volt Page 43 Owner'S Manual Download

Page: 43 / 478

Black plate (11,1)

Chevrolet Volt Owner Manual - 2011

Keys, Doors and Windows

2-11

WARNING (Continued)

Fully open the air outlets on
the instrument panel.

Adjust the Climate Control
system to a setting that
brings in only outside air
and set the fan speed to
the highest setting. See

Automatic Climate Control
System on page 8

‑

For more information about
carbon monoxide, see

Engine

Exhaust on page 9

‑

To open the hatch, with all doors
unlocked, press the button on the
underside of the hatch and lift up.

Use the inside pull handle to lower
and close the hatch.

Always close the hatch before
driving. Do not press the button
while closing the hatch; it will unlock
again.

Summary of Contents for 2011 Volt































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 Volt

Reviews:

Related manuals for 2011 Volt

Brands by name

Popular brands

Chevrolet 2011 Volt, Owner'S Manual

Search results

Summary of Contents for 2011 Volt

Reviews:

Related manuals for 2011 Volt

Brands by name

Popular brands