Chevrolet 2011 Volt, Owner'S Manual

Page: 297 / 478

Black plate (19,1)
Chevrolet Volt Owner Manual - 2011
Driving and Operating 9-19
2. Shift the vehicle to N (Neutral).
This can be done while the
vehicle is moving. After shifting
to N (Neutral), firmly apply the
brakes and steer the vehicle to a
safe location.
3. Come to a complete stop,
shift to P (Park), and turn the
vehicle to OFF by pushing the
POWER
O
button.
4. Set the parking brake. See
Electric Parking Brake on
page 9
‑ 32 .
{
WARNING
Turning off the vehicle while
moving may disable the airbags.
While driving, only shut the
propulsion system off in an
emergency.
5. If the vehicle must be stopped
while driving, press and hold the
POWER
O
button for either
longer than two seconds,
or press twice in five seconds.
Starting and Stopping the
Vehicle
Starting Procedure
Move the shift lever to P (Park) or
N (Neutral). The propulsion system
will not start in any other position.
Notice: Do not try to shift to
P (Park) if the vehicle is moving
or the electric drive unit could be
damaged. Shift to P (Park) only
when the vehicle is stopped.
Notice: The vehicle is designed
to work with the electronics in
the vehicle. If you add electrical
parts or accessories, you could
change the way the vehicle
operates. Before adding electrical
equipment, check with your
dealer. If you do not, the vehicle
might not perform properly. Any
resulting damage would not be
covered by the vehicle warranty.
The Remote Keyless Entry (RKE)
transmitter must be in the vehicle.
Press the brake pedal and push and
release the POWER
O
button.
If the RKE transmitter is not in the
vehicle or something is interfering
with the transmitter, a message
displays in the Driver Information
Center (DIC). See
Key and Lock
Messages on page 5 ‑ 44 .
If the vehicle will not start due to a
low RKE transmitter battery, the
vehicle can still be driven. See
“ Starting the Vehicle with a Low
Transmitter Battery ” in Remote
Keyless Entry (RKE) System
Operation on page 2
‑ 3 .