Chevrolet 2011 Volt, Owner'S Manual

Page: 258 / 478

Black plate (82,1)
Chevrolet Volt Owner Manual - 2011
7-82 Infotainment System
Digit Dial: This command allows
a phone number to be dialed by
entering the digits one at a time.
Re ‐ dial: This command is used to
dial the last number used on the cell
phone.
Using the “ Dial ” or “ Call ”
Command
1. Press
b g
. Say “ Hands Free ”
after the tone.
2. Say “ Dial ” or “ Call. ”
3. Say the entire number without
pausing or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
Using the “ Digit Dial ” Command
The digit dial command allows a
phone number to be dialed by
entering the number one at a time.
After each number is entered, the
system repeats back the number it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
“ Clear ” at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
“ Verify ” at any time.
1. Press
b g
. Say “ Hands Free ”
after the tone.
2. Say “ Digit Dial. ”
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the
last digit has been entered,
say
“ Dial. ”
Once connected, the person called
will be heard through the audio
speakers.
Using the “ Re ‐ dial ” Command
1. Press
b g
. Say “ Hands Free ”
after the tone.
2. After the tone, say “ Re ‐ dial. ”
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
. Press
b g
to answer the call.
. Press
$ i
to ignore a call.
Call Waiting
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
. Press
b g
to answer an
incoming call when another call
is active. The original call is
placed on hold.