manualshive.com logo in svg

Chevrolet 2011 Volt, Owner'S Manual

Looking for the Owner's Manual for your Chevrolet 2011 Volt? Look no further! Download the manual for free at our website manualshive.com and get all the information you need to optimize your driving experience. Get the most out of your Chevy Volt with this comprehensive manual download.

Share
Download
background image

Black plate (53,1)

Chevrolet Volt Owner Manual - 2011

Vehicle Care

10-53

side rear tire, and driver side rear.
See your dealer for service or to
purchase a relearn tool.

There are two minutes to match
the first tire/wheel position, and
five minutes overall to match all
four tire/wheel positions. If it takes
longer, the matching process stops
and must be restarted.

Follow the TPMS sensor matching
process:

1. Set the parking brake.

2. Put the vehicle in ON/RUN and

place the vehicle in P (Park).

3. If the DIC display is minimized,

press the SELECT knob to
maximize it.

4. Use the SELECT knob to scroll

to the Tire Pressure display
screen.

5. Press and hold the SELECT

knob for five seconds to begin
the sensor matching process.

A message displays confirming
to begin the process.

6. Use the SELECT knob to select

YES with the highlighted
selection, and press the
SELECT knob again to confirm
the selection.

The horn sounds twice to signal
the receiver is in relearn mode
and the TIRE LEARNING
ACTIVE message displays on
the DIC screen.

7. Start with the driver side

front tire.

8. Place the relearn tool against

the tire sidewall, near the valve
stem. Then press the button to
activate the TPMS sensor.
A horn chirp confirms that the
sensor identification code has
been matched to this tire and
wheel position.

9. Proceed to the passenger side

front tire, and repeat the
procedure in Step 8.

10. Proceed to the passenger side

rear tire, and repeat the
procedure in Step 8.

11. Proceed to the driver side rear

tire, and repeat the procedure
in Step 8. The horn sounds
two times to indicate the
sensor identification code has
been matched to the driver
side rear tire, and the TPMS
sensor matching process is
no longer active. The TIRE
LEARNING ACTIVE message
on the DIC display screen
goes off.

12. Turn the vehicle off.

13. Set all four tires to the

recommended air pressure
level as indicated on the Tire
and Loading Information label.

Summary of Contents for 2011 Volt































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Volt

CITROËN C4 CACTUS Handbook preview
C4 CACTUS
Brand: CITROËN Pages: 301
U.S. General 95904 Operating Instructions preview
95904
Brand: U.S. General Pages: 4
Cadillac 2007 SRX Owner'S Manual preview
2007 SRX
Brand: Cadillac Pages: 522
rough country 921107830 Installation Instruction preview
921107830
Brand: rough country Pages: 4
Master Tailgaters MR-43E2DVR1 User Manual preview
MR-43E2DVR1
Brand: Master Tailgaters Pages: 10
Magneti Marelli Obd Road User Manual preview
Obd Road
Brand: Magneti Marelli Pages: 9
OMNISTOR Omni-Bike Sport Ducato Installation preview
Omni-Bike Sport Ducato
Brand: OMNISTOR Pages: 5
AUTOTECH 10.109.418K Installation Instructions preview
10.109.418K
Brand: AUTOTECH Pages: 4
Uniden BTSC1100 Owner'S Manual preview
BTSC1100
Brand: Uniden Pages: 16
Westfalia 17 56 46 Instruction Manual preview
17 56 46
Brand: Westfalia Pages: 2
Toyota 1998 Celica Owner'S Manual preview
1998 Celica
Brand: Toyota Pages: 204
Road Ranger ET 210207 Installation Instruction preview
ET 210207
Brand: Road Ranger Pages: 3
Funkwerk EGO FLASH Operating Manual preview
EGO FLASH
Brand: Funkwerk Pages: 58
Winegard RangePro WB-1035 Quick Setup Manual preview
RangePro WB-1035
Brand: Winegard Pages: 2
Active Controls ActiveStart ACS30P Installation, Operation & Application Manual preview
ActiveStart ACS30P
Brand: Active Controls Pages: 2
Honda 2012 Pilot Owner'S Manual preview
2012 Pilot
Brand: Honda Pages: 682
FORM FIT HD 21D 06 Quick Manual preview
HD 21D 06
Brand: FORM FIT Pages: 2
JCROffroad XJRK Installation Instructions Manual preview
XJRK
Brand: JCROffroad Pages: 6

Brands by name

Popular brands

Load more brands