Chevrolet 2011 Volt Owner'S Manual Download

Page: 13 / 478

Black plate (7,1)

Chevrolet Volt Owner Manual - 2011

In Brief

1-7

Height Adjustment

Move the lever up or down to raise
or lower the seat.

See

“

Seat Height Adjuster

”

under

Seat Adjustment on page 3

‑

Reclining Seatbacks

To recline the seatback:

1. Lift the lever.

2. Move the seatback to the

desired position, and then
release the lever to lock the
seatback in place.

3. Push and pull on the seatback to

make sure it is locked.

To return the seatback to the upright
position:

1. Lift the lever fully without

applying pressure to the
seatback, and the seatback will
return to the upright position.

2. Push and pull on the seatback to

make sure it is locked.

See

Reclining Seatbacks on

page 3

‑

Heated Seats

If available, the controls are on the
center stack. To operate, the vehicle
must be on.

Press

to heat the driver or

passenger seat cushion and
seatback.

Summary of Contents for 2011 Volt































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 Volt

Reviews:

Related manuals for 2011 Volt

Brands by name

Popular brands

Chevrolet 2011 Volt, Owner'S Manual

Search results

Summary of Contents for 2011 Volt

Reviews:

Related manuals for 2011 Volt

Brands by name

Popular brands